MCF coarse powder mill series is a kind of new high-tech milling machine to meet the requirements of sand processing customers. Based on our experts' years' research experience in the milling industry and considering recommendations and requirements of domestic and foreign clients, it is the ideal equipment to replace Raymond Mill, mill, ball mill, and other traditional which only process power materials. It is high-efficiency equipment and widely applied in quartz sand, silica sand, foundry sand, fine sand and other sand abrasive industry. By being a component of closed production lines, it can produce various size products of better effect.
Step with main shaft, bulk disk and roller bracket is driven by motor through reducer. Installed above bracket, roller assembly rotates with main shaft and swings freely meantime, this bring a large centrifugal force, which scatters bulk materials evenly in grinding intermediate layer between central roller and ring. The bulk materials are grinded into powder and fall on the bottom, and then discharged from discharging opening under the effect of synchronously-rotating scraper.
MCF coarse powder mill main features:
1. High quality wear parts, long life time2. High percentage of sand product
3. Better desulfurization effect
4. As pre-grind equipment to increase efficiency of the latter machine
5. Wide range of application.
MCF coarse powder mill specifications:
| Name | Parameter | Remark |
| Model | MCF1004 | |
| Roller quantity | 4pcs | |
| Max. feeding size | <30 mm | Too hard material<20mm |
| Product size | 70-90%<2mm | Adjustable, check below |
| Capacity | 8-15ton/hour | Relative to average size and hardness of feeding material |
| Main motor power | 37-45 kw | Use small motor if use fine material and want low capacity |
| Main motor model | Y2-225M-4 | Installation model V6 |
| Overall size（L×W×H） | 1.87×1.5×2.58(m） | Including main motor, decelerator and main unit |
| Largest single pc weight | 900kg | |
| Total weight（excluding electricity control cabinet） | 8ton | Decelerator weight 1.7 ton |
| Name | Model | Power | Remark |
| Jaw crusher of fine crushing | PEX150×750 | 15KW | |
| Bucket elevator | TH250 | 3KW | Speed≥1.2m/s |
Electromagnetic Vibrating feeder |
GZ3 | 0.2KW | Distance between inlet and outlet 1000 |